89.93 EUR

excl. VAT, excl. transport

This email address is being protected from spambots. You need JavaScript enabled to view it.

DPM72PP Graphic Processmeter with USB

Graphical panel meter for voltage and ampere with USB interface.

Graphical measuring instrument which unites the benefits of an analogue display with the accuracy of a digital instrument. The common measure modes (volt AC/DC, ampere, frequency and 5 A current transformer) are supported. Scale-endpoint of the indicator as well as scaling of the analogue signal and current transformer measurement can be adjusted freely via the DIP-switch, alternatively there is an option for automatic adaption of the scale-endpoint. The unit can be switched between volt and ampere measurement via an external switch. Minimum and maximum values are recorded and can be displayed optionally using an external switch. Measured values are recorded over a timespan of three minutes up to 14 days. The timebase as well as the display of the measuring history can be activated by an external switch. The following parameters can be adjusted using the USB-Software: Scale-endpoint, scale-caption, display-style (pointer, tachometer, bargraph, and more), splash display, thresholds for alarm output, hysteresis, and more. Recorded measurement values can be read and a continuous transmission of the actual measuring value can be enabled. Using the software, values can be viewed and exported as CSV.


  • Graphic display 16 grey levels with white backlight
  • Pointer and digital display
  • USB interface, galvanically isolated
  • Adjustable scale-endpoint
  • Recording of measurement over up to 14 days
  • Alarm outputs with adjustable thresholds, galvanically isolated
  • User splash display
  • Different display styles, e.g. tachometer, bargraph, timebased view
  • Transmission of measure value
  • Integration of measure value
  • Supply 12 - 24 V AC/DC, galvanically isolated
  • Accuracy 1 % true RMS
  • Windows software for individual configuration and measure value recording


Supply 12 - 24 V AC/DC, galvanically isolated
Display LCD graphic display 192 x 160 pixels
Measuring range voltage AC 0 - 500 V
DC +/- 500 V
Accuracy voltage 1 %
Measuring range ampere AC 0 - 10 A
AC 5 A for current transformer
DC +/- 10 A
Accuracy ampere 1 %
Measuring range frequency 10 - 500 Hz
Accuracy frequency 0,1 Hz
Recording of measurement 3 min to 14 days
Alarm outputs 2 optocouple outputs max. 30 V, 50 mA
Operating temperature 0 °C to +50 °C
Storage temperature -20 °C to +70 °C
Front panel 72 mm × 72 mm
Panel cut out 68 mm × 68 mm
Fixation Bracket
Protection front IP65
Manufacturer TDE Instruments

Order information

Digalox DPM72-AVP Graphical DIN panel meter for voltage and ampere with USB interface.